Energy and Power Engineering

  • Engine Research Institute
  • The Research Center of Power Machinery
  • Laboratory of Fluid Mechanics and Engineering
  • Institute of Thermal Engineering
  • Institute of Turbomachinery
  • Institute of Refrigeration and Cryogenics Engineering
  • Jiang Yuyan

    NAME

    JIANG Yuyan



    TITLE

    Professor

    SCHOOL

    Mechanical Engineering

    DEPARTMENT

    Energy and Power Engineering

    OFFICE ADDRESS

    Room 314, 1st Building, Zhongguancun Campus

    POST CODE

    100081

    E-MAIL ADDRESS

    jiangyuyan@bit.edu.cn

    Research and Teaching Interest

    1. Micro/nanoscale boiling and condensation heat transfer

    2. Computational fluid dynamics of two-phase flow

    3. High Temperature heat pump, S-CO2 power cycles

    4. Heat pipe technology, thermal management for power devices

    Selected Publications and patents

    [Heat pump, S-CO2 power cycle]

    1. J Chen, C Guo, C Feng, X Qu, S Tan, Y Jiang, Research of CO2 high temperature heat pump for industrial steam generation with data center heat source, International Journal of Refrigeration,173,185-200, (2025).

    2. C Feng, C Guo, J Chen, S Tan, Y Jiang, Theoretical study of an auto-cascade high-temperature heat pump using vapor injection and parallel compression techniques for steam generation, Thermal Science and Engineering Progress 60, 103482, (2025).

    3. ZY Wang, SC Tan, JM Zhu, C Guo, YY Jiang, Research on mini-channel heat exchangers with honeycomb modular structure: Design principles and convective heat transfer, International Journal of Thermal Sciences 214, 109832, (2025).

    4. J Chen, C Guo, C Feng, X Qu, S Tan, W Sun, Y Jiang, Non-equilibrium condensation modeling of CO2 nozzle flow under subcritical and supercritical conditions, Physics of Fluids 37 (3), (2025).

    5. C Feng, C Guo, J Chen, S Tan, Y Jiang, Thermodynamic analysis of a dual-pressure evaporation high-temperature heat pump with low GWP zeotropic mixtures for steam generation, Energy 294, 130964, (2024).

    6. H Hu, T Wang, Y Jiang, C Bi, B Zhang, S Fan, J Li, S An, X Bai, C Guo, Thermodynamic performance of heat pump with R1234ze (E)/R1336mzz (E) binary refrigerant, Applied Thermal Engineering 230, 120795, (2023).

    7. Y Zhu, S Liang, C Guo, Y Guo, Z Li, X Gong, Y Jiang, Experimental Study on a Supercritical CO2 Centrifugal Compressor Used in a MWe Scale Power Cycle, Applied Sciences 13 (1), 385, (2022).

    8. H Cai, S Liang, C Guo, T Wang, Y Zhu, Y Jiang, Numerical investigation on heat transfer of supercritical carbon dioxide in the microtube heat exchanger at low Reynolds numbers, International Journal of Heat and Mass Transfer 151, 119448,(2020).

    9. H Hu, C Guo, H Cai, Y Jiang, S Liang, Y Guo, Dynamic characteristics of the recuperator thermal performance in a S–CO2 Brayton cycle, Energy 214, 119017, (2020).

    10. H Hu, Y Jiang, C Guo, S Liang, Thermodynamic and exergy analysis of a S-CO2 Brayton cycle with various of cooling modes, Energy Conversion and Management 220, 113110, (2020).

    11. H Hu, S Liang, Y Jiang, C Guo, Y Guo, Y Zhu, H Cai, Thermodynamic and exergy analysis of 2 MW S-CO2 Brayton cycle under full/partial load operating conditions, Energy Conversion and Management 211, 112786, (2020).

    12. H Cai, Y Jiang, T Wang, S Liang, Y Zhu, Experimental investigation on convective heat transfer and pressure drop of supercritical CO2 and water in microtube heat exchangers, International Journal of Heat and Mass Transfer 163, 120443, (2020).

    [Boiling heat transfer, Heat pipe]

    1. Q Zhang, SC Tan, JM Zhu, YY Jiang, C Guo, Heat transfer characteristics of a flat plate pulsating heat pipe with microstructures for unidirectional thermal-to-mechanical energy conversion, Applied Physics Letters 126 (5), (2025).

    2. Y Sun, Z Zhang, G Zhang, Y Jiang, J Zheng, Effect of surface wettability on bubble dynamics and heat transfer in microchannel flow boiling, International Journal of Heat and Mass Transfer 241, 126729, (2025).

    3. SC Tan, Q Xu, T Wang, C Guo, YY Jiang, H Kong, A new investigation on permeability of multilayer stacked screen wick, International Communications in Heat and Mass Transfer 158, 107912, (2024).

    4. SC Tan, XB Pang, Q Xu, C Guo, YY Jiang, Study on the permeability and capillary pressure of spiral woven mesh for flat-plate heat pipes, Applied Thermal Engineering 256, 124118, (2024).

    5. J Zhu, P Zhang, S Tan, T Wang, C Guo, Y Jiang, Mechanisms of micro liquid film heat transfer during flow boiling in non-circular microchannels part I: Measurement and theoretical model of transient film thickness, International Journal of Heat and Mass Transfer 235, 126198. (2024).

    6. P Zhang, T Wang, Y Jiang, C Guo, Measurement of transient liquid film and its effect on flow boiling heat transfer in non-circular microchannels, International Journal of Thermal Sciences 184, 108004, (2023).

    7. C Guo, T Wang, C Guo, Y Jiang, S Tan, Z Li , Effects of filling ratio, geometry parameters and coolant temperature on the heat transfer performance of a wraparound heat pipe, Applied Thermal Engineering 200, 117724, (2022).

    8. Z Che, T Wang, F Sun, Y Jiang, Research on heat transfer capability of liquid film in three-phase contact line area, International Journal of Heat and Mass Transfer 195, 123158, (2022).

    9. C Guo, J Tao, Y Jiang, Y Sun, T Wang, Measurement and theoretical analysis of transient liquid film during micro-channel flow boiling, International Journal of Multiphase Flow 130, 103365, (2021).

    10. L Zhang, T Wang, S Kim, S Tan, Y Jiang, Boiling enhancement on surfaces with smart wettability transition, Applied Physics Letters 115 (10), (2019).

    11. Y Liu, Z Li, Y Li, Y Jiang, D Tang, Heat transfer and instability characteristics of a loop thermosyphon with wide range of filling ratios, Applied Thermal Engineering 151, 262-271, (2019).

    12. L Zhang, T Wang, Y Jiang, SH Kim, C Guo, A study of boiling on surfaces with temperature-dependent wettability by lattice Boltzmann method, International Journal of Heat and Mass Transfer 122, 775-784, (2018).

    13. Y Liu, Z Li, Y Li, S Kim, Y Jiang, Experimental investigation of geyser boiling in a two-phase closed loop thermosyphon with high filling ratios, International Journal of Heat and Mass Transfer 127, 857-869,(2018).

    Achievements and Awards

    1. Best paper, JMST, 2021.

    2. Best paper, Annual Symposium of Heat and mass transfer, awarded in 2016, 2017, 2018, 2020.

    3. Award for Outstanding IAR Collaboration, conferred by China Industry-University-Research Institute Collaboration Association, 2020.

    4. Award for Outstanding Invention, conferred by China Association of Inventions, 2021.

    Professional Membership/Academic Appointments

    1. Member of Heat Pipe Committee of China.

    2. Vice Chairman, China Thermal Management Alliance.

    3. Member of ASME, JSME.